top of page

5 Star Rated  ·  0333 335 0095  ·  Get in touch on info@forestspas.com

5 Star Rated · 0333 335 0095 · Info@forestspas.com

Air Locks in Round Hot Tubs: Causes, Symptoms and How to Fix Them

Nov 5
6 min read

An air lock can be a frustrating problem for any hot tub owner. You switch your spa on, expect the pumps to start circulating water, but instead you hear an unusual noise, notice weak water flow or find that the jets are not working as they should.

At Wyre Forest Spas, we understand how important it is to keep your hot tub running smoothly. Air locks can sometimes occur after draining, refilling or carrying out maintenance, and they can prevent water from circulating correctly.

In this guide, we explain what causes air locks in round hot tubs, how to recognise the signs, what you can safely check and how air locks can affect other types of hot tubs.

What Is an Air Lock in a Hot Tub?

An air lock occurs when air becomes trapped in part of the hot tub's water circulation system, preventing water from flowing as it should.

Hot tub pumps are designed to move water through the plumbing, filtration system, heater and jets. If air becomes trapped in the wrong place, the pump may struggle to draw in water or establish proper circulation.

Air locks are particularly worth checking after a hot tub has been drained and refilled, as air can become trapped in the plumbing while the system is empty.

Not every circulation problem is an air lock, however. A blocked filter, closed valve, low water level, faulty pump or another plumbing issue can produce similar symptoms.

Why Do Air Locks Occur in Round Hot Tubs?

Round hot tubs come in different designs, from portable inflatable spas to rigid acrylic or rotationally moulded models. Their plumbing and pump arrangements can vary considerably, so the correct troubleshooting method depends on the type of spa you own.

Several situations can contribute to an air lock.

1. Refilling the Hot Tub After Draining

One of the most common times for an air lock to develop is when a hot tub is refilled after cleaning, maintenance or winter preparation.

As water enters the spa, air may remain trapped in sections of the plumbing or pump housing. If that air prevents the pump from drawing water properly, circulation may not start as expected.

Following the manufacturer's filling instructions can help reduce this risk. Some models recommend filling through a particular filter compartment or connection to help minimise trapped air.

2. Low Water Levels

If the water level falls below the manufacturer's recommended operating level, the pump may draw in air instead of water.

This can interrupt circulation and may contribute to pump noise or reduced jet performance.

Always maintain the water level within the range specified by the manufacturer, particularly when the jets are running.

3. Air Trapped Around the Pump

Depending on the spa's design, air can become trapped in or around the pump and connected plumbing after draining or maintenance.

If the pump cannot establish a steady flow of water, the system may fail to circulate properly. The correct remedy depends on the pump design and whether the manufacturer provides a safe bleeding or priming procedure.

4. Incorrect Refilling or Maintenance Procedures

Refilling a hot tub without following the recommended procedure can increase the likelihood of trapped air.

Before draining or refilling your spa, check the user manual for any model-specific instructions. Taking a little extra care during this process can help prevent circulation problems afterwards.

Common Signs of an Air Lock in a Round Hot Tub

If your round hot tub has developed an air lock, you may notice one or more of the following symptoms:

  • Jets producing little or no water flow: The pump may not be circulating water effectively.

  • A pump that hums but does not move water: This can indicate a problem with priming or circulation, but other faults are also possible.

  • A circulation or flow error: Some hot tubs display an error when the system cannot establish the required water flow.

  • Water not circulating through the filtration system: You may notice reduced movement at the filter return or circulation outlet.

  • Problems starting after a refill: If the spa worked correctly before draining but circulation failed after refilling, trapped air is one possible cause.

It is important not to assume every one of these symptoms means there is an air lock. A technician may need to investigate other possible causes if the problem persists.

How to Deal with an Air Lock in a Round Hot Tub

If you suspect an air lock, take care before attempting to resolve it. Running a pump without sufficient water flow can cause overheating or damage, depending on the pump and protection systems fitted.

Step 1: Check the Water Level

Make sure the water level is within the manufacturer's recommended range. If it is too low, add water according to the filling instructions for your model.

Step 2: Check the Filter and Accessible Valves

If it is safe to do so, check that the filter is correctly installed and not excessively dirty or blocked. Confirm that any user-accessible valves are in their correct operating positions.

Do not remove plumbing fittings or open equipment compartments while the spa is powered.

Step 3: Follow the Manufacturer's Priming Instructions

Some hot tubs provide a specific priming procedure after refilling. Follow the instructions for your exact model rather than relying on a general method, as pump systems differ.

If the instructions require the power to be isolated, ensure this is done as directed. Never run a pump dry or repeatedly restart it when there is no adequate water flow.

Step 4: Stop if the Pump Is Not Circulating Water

If the pump hums, makes unusual noises, displays a persistent flow error or fails to move water, stop the system according to the manufacturer's instructions.

Do not repeatedly switch the pump on and off in an attempt to force the air through. If the recommended priming procedure does not work, seek professional assistance.

Step 5: Arrange a Professional Inspection if Needed

If the problem continues, the cause may be an air lock, a blocked filter, a faulty pump, a closed valve or another plumbing issue.

A qualified hot tub technician can identify the cause and determine the appropriate repair without risking further damage.

Are Air Locks Different in Other Types of Hot Tubs?

Air locks can affect many types of hot tubs, but the best way to address them depends on the design of the spa.

Inflatable Hot Tubs

Inflatable hot tubs often use compact pump and heater units. After draining and refilling, trapped air or an issue with the filter assembly can sometimes interrupt water circulation. Follow the manufacturer's priming instructions and check the water level and filter before attempting any further troubleshooting.

Acrylic and Rigid Shell Hot Tubs

Rigid hot tubs may have more complex plumbing, multiple pumps, diverter valves and separate circulation systems. Air can become trapped in different sections after draining or maintenance, so the cause may require a more detailed inspection.

Swim Spas and Larger Hot Tubs

Larger spas may have several pumps and more extensive plumbing arrangements. If one circuit is not circulating correctly, the issue could involve trapped air, a valve position, a blocked component or a mechanical fault.

The key point: never assume that the same air-lock procedure will work for every hot tub. Always follow the manufacturer's instructions for your particular make and model.

How to Help Prevent Air Locks

A few simple precautions can reduce the likelihood of air-lock problems:

  • Follow the correct filling procedure whenever you refill your hot tub.

  • Keep the water level within the recommended range.

  • Maintain and clean the filters according to the manufacturer's schedule.

  • Check accessible valves are positioned correctly after maintenance.

  • Follow the recommended pump-priming procedure after draining.

  • Investigate unusual pump noises or reduced water flow promptly.

Regular servicing can also help identify developing circulation problems before they become more disruptive.

Air Lock Problems? Contact Wyre Forest Spas

An air lock can sometimes be resolved by following the correct priming procedure, but persistent circulation problems should never be ignored. Running a pump without adequate water flow can cause damage and may lead to more expensive repairs.

At Wyre Forest Spas, we understand that every hot tub is different. Whether you have a round hot tub, an inflatable spa or a rigid-shell model, identifying the underlying cause is the first step towards getting your water flowing correctly again.

If your hot tub has weak jets, a circulation error or a pump that will not prime after refilling, contact Wyre Forest Spas for advice on the next steps.

Get in touch with Wyre Forest Spas today for hot tub servicing, troubleshooting and repair advice.


 
 
 

Comments


bottom of page